Truma Combi / Ultrastore Assembly Pack - 12mm Pushfit

This Assembly Pack is for use on the Truma Combi range of boilers in motorhomes, caravan & campervans. Kit includes- 1 x Truma Safety Drain & Pressure Relief Valve with approximately 100mm of ½” (12mm) ID clear drainage hose. 1 x Red (hot) fitting which connects to the take-off point (upper). This contains a one-way valve to allow air into the boiler when draining down. 1 x Blue (cold) fitting which connects to the fill point (lower) on the boiler. Both the red and blue fittings have a 10mm push fit connector one side that push directly onto the stainless steel pipes coming out of the boiler. The other end of each fitting has a 12mm push fit connector for use with John Guest or Whale semi-rigid pipe. A suitable non-return valve should be fitted inline before the drain valve, this prevents water running back out of the boiler to prevent damage. The valves are not included in this kit but can be found in our other lisitngs. This is the most popular assembly set for these types of boilers due to the ease of use of the push-fit fittings.