12v/20psi/7Ltr Seaflo Series 33 Water Pump - Retail Packed With Fittings
12v/20psi/7Ltr Seaflo Series 33 Water Pump - Retail Packed With Fittings
Couldn't load pickup availability
The SEAFLO Series 33 12V 7L/min 20PSI Water Pump is a compact, self-priming diaphragm pump designed for caravans, motorhomes, campervans, boats and van conversions. Delivering a maximum flow rate of 7 litres per minute and a pressure rating of 20 PSI (1.4 bar), this pump is particularly suitable for smaller pressurised fresh-water systems supplying taps, sinks and compatible showers.
Featuring a three-chamber diaphragm design, the SEAFLO Series 33 provides reliable water delivery with an integrated automatic pressure switch that starts and stops the pump according to water demand. Its lower 20 PSI pressure setting makes it a practical choice for water systems where higher-pressure pumps are unnecessary or unsuitable.
Supplied retail packed with connection fittings, this pump is ideal for replacing an existing water pump or installing a new fresh-water system. Its compact construction and rubber mounting feet help minimise vibration and operating noise, making it particularly suitable for installations where space is limited.
Features
• 12V DC Operation – Suitable for leisure vehicle and marine electrical systems
• 7 Litres Per Minute – Maximum flow rate suitable for smaller fresh-water systems
• 20 PSI Pressure – Automatic pressure-controlled operation up to approximately 1.4 bar
• Three-Chamber Diaphragm – Designed for reliable and consistent water delivery
• Automatic Pressure Switch – Starts and stops the pump according to water demand
• Self-Priming Design – Allows installation above the water tank within its rated suction lift
• Run-Dry Capability – Designed to tolerate occasional operation without water
• Rubber Mounting Feet – Help reduce vibration and operating noise
• Retail Packed With Fittings – Supplied with connection fittings for installation
• Compact Design – Ideal for caravans, motorhomes, campervans and boats
Specifications
• Brand: SEAFLO
• Series: 33
• Voltage: 12V DC
• Maximum Flow Rate: 7 Litres Per Minute
• Pressure Rating: 20 PSI (1.4 bar)
• Pump Type: Three-Chamber Diaphragm
• Pressure Switch: Automatic
• Priming: Self-Priming
• Run-Dry Capability: Yes
• Mounting: Rubber Mounting Feet
• Packaging: Retail Box
• Supplied With: Water Pump and Connection Fittings
Installation Information
The pump should be connected to a suitably rated 12V DC electrical supply and installed between the fresh-water tank and the vehicle's pressurised plumbing system. An inlet strainer is recommended to prevent debris from entering the pump, while a compatible accumulator tank can help smooth water flow and reduce frequent pump cycling.
Please Note: Always check that your existing pipework, taps, water heater and other plumbing components are suitable for the pump's 20 PSI pressure rating. The stated 7L/min flow rate is a maximum figure, and actual performance will depend on the installation and any restrictions within the water system.
Share

Frequently Asked Questions
The SEAFLO Series 33 is designed for pressurised fresh-water systems in caravans, motorhomes, campervans, boats and van conversions. Its 7 litres per minute flow rate makes it particularly suitable for smaller water systems supplying kitchen taps, washbasins and compatible showers.
Yes. The pump features an integrated pressure switch that starts the pump when a tap is opened and system pressure drops. When the tap is closed and pressure reaches the pump's 30 PSI shut-off setting, the pump automatically switches off.
Yes. The diaphragm design allows the pump to tolerate occasional dry running without immediate damage. This is useful during initial priming or if the fresh-water tank becomes empty. However, prolonged unnecessary dry running should be avoided.
Yes. The Series 33 is self-priming, allowing installation above the fresh-water tank within its rated suction lift. SEAFLO specifies a self-priming capability of approximately 1.8 metres for the Series 33 design, although actual performance depends on the installation and pipework.
An accumulator tank is not essential for basic operation, as the pump uses an automatic pressure switch. However, installing a suitable accumulator can help reduce frequent pump cycling, minimise pressure fluctuations and provide a smoother water flow, particularly when using taps at low flow rates.
A 30 PSI pump has a higher pressure shut-off setting than a 20 PSI model, potentially providing stronger water delivery in a compatible system. Both pumps may have the same maximum flow rating, but actual performance will depend on pipework and water demand. Always ensure your water heater and plumbing components can accommodate the higher pressure.
This version is supplied retail packed with connection fittings. SEAFLO Series 33 pumps commonly use 1/2" male NPT threaded inlet and outlet ports, with adaptors allowing connection to suitable water pipework. Check the included fittings to confirm compatibility with your installation.
Can't find the answer you're looking for?
Give our technical team a call on 01271 611015 (Option 2) and we'll be happy to help.